KOR Machinery Brings the SR2-430 to LOUPE Americas 2026
KOR Machinery brings the SR2-430 slitter rewinder to LOUPE Americas 2026, Sept 15-17 in Chicago. See it live at Booth 112.
This September, KOR Machinery is bringing the SR2-430 inspection slitter rewinder to LOUPE Americas 2026 (formerly Labelexpo Americas), running live on the show floor at Booth 112.
LOUPE Americas 2026 (Booth 112), September 15 to 17, 2026 at the Donald E. Stephens Convention Center in Rosemont (Chicago), USA
See the SR2-430
The SR2-430 is KOR's entry point into narrow web label finishing: an affordable, one-step S-Series inspection slitter rewinder built for small and mid-volume operations. It handles standard and filmic PS labels across an 17" (430mm) web at a top running speed of 1000fpm (305m/min), no extra steps, no additional inspection pass.
Build the machine around your requirements with:
- Vision inspection to catch and remove defects before they ship!
- Razor slitting to cut changeover time between jobs and to work on filmic substrates
And configure it for specialty work: blank label production, coreless rewinding, or variable data printing and inspection.
For small and mid-volume label finishing, it's hard to argue with the value.
See the SR2-430 in Action at Booth 112
Spec sheets only tell you so much. At Booth 112, watch the SR2-430 run a live job, see the auto-positioning slitter reset between widths, and put your own questions to the team.
FAQ
What is the KOR SR2-430? The SR2-430 is a one-step Inspection Slitter Rewinder from KOR Machinery's S-Series, built for pressure-sensitive label finishing of a 17" (430mm) web width at a speed of up to 1000fpm (305m/min).
What upgrades are available on the SR2-430? The SR2-430 can be configured with vision inspection and auto-positioning rotary shear slitting, plus three specialty configurations: blank label production, coreless rewinding, and variable data printing and inspection.
Where can I see the SR2-430 in person? KOR Machinery is running the SR2-430 live at Booth 112, LOUPE Americas 2026, September 15 to 17 at the Donald E. Stephens Convention Center in Rosemont (Chicago).
Want to walk through your application before the show? Contact KOR Machinery, and we'll get you on the schedule.